-
1 Gallon AB Epoxy Resin
Quick Details CAS No.:38891-59-7 Other Names:epoxy resin MF:Mixture Classification:Double Components Adhesives Main Raw Material:Epoxy Usage:Woodworking, DIY Brand Name:Desay Type:Two Component Product name:Epoxy AB Glue Mixing Ratio:A:B=1:1 Application:Handicrafts Color:Transparent Viscosity:3500-4500 Shelf life:12 Months Certificate:ISO9001 Feature:Self-leveling Volume:1 gallon/set OEM:Avliable -
-
stone adhensive
Glue ratio: 2:1/3:1/5:1/5:2
Material: Polyurethane/Epoxy
Viscosity: A component ≥5000mps
Component B ≥200mps
Drying time/H: surface dry ≤5h fully cured 24H
Mechanical properties: 7D tensile bond strength/mpa ≥5.0
Impact strength kj/㎡ ≥80
Hardness: Shore D 80
AB hue: close to colorless <5
Chemical resistance: 15% NaOH coating finish, no blistering, no coating finish, no blistering, no peeling
Shrinkage rate: about 1%~2%
Environmental protection: non-polluting, non-toxic, harmless, polymerization reaction, non-volatile
Packaging: 20kg, 25kg, 50kg, 200kg, 1000kg
Model: DS-728A728B
Product Name: Adhesive Stone Adhesive
Brand Name: Desai Deisay
Storage: Store in a cool, ventilated and dry place
Application: glue additive for color stone series glue
Active substance: ≥
Reference amount: glue stone ratio (1:30~35)
Shelf life: 12 months -
3D Floor Epoxy resin glue
CAS No.:61788-97-4
Other Names:diy drop glue
Place of Origin:China
Classification:Double Components Adhesives
Main Raw Material:epoxy resin
Usage:Woodworking, diy
Model Number:OS-806AB
Type:diy glue
Product name:Epoxy Resin Crystal drops of AB Glue
Color:transparent
volume proportion:3:1
curing time:24h
shelf time:six months
Package size:5kg+15kg
Application:3D floor, painting, marble table, river desk -
Wholesale Dealers of China Factory Supply Top Quality CAS 61788-97-4 Phenolic Epoxy Resin
Method of use
1.open the scale,put on the measruing cup and clear it
2.Put glue A first,then glue B ,the proportion is 1.25:1
3.Stir evenly until it is transparent and uniform without drawing
4.The mixed glue is still for a few minutes.when the bubble disappears pour it into the grinding tool
5.Use toothpick to stick a little color to the glue dropping mold,and stir ie slightly to the desired ink effect
6.Or pour the toner poeder into the prepared gutta percha,stir evenly and then pour into the mold
7.It can be demoulded after the adhesive is completely solidified,usually it takes 24h in room temperature
8.After demoulding,polish slightly,the finished product will be more beautiful
-
Wholesale Dealers of China Factory Supply Top Quality CAS 61788-97-4 Phenolic Epoxy Resin
Method of use
1.open the scale,put on the measruing cup and clear it
2.Put glue A first,then glue B ,the proportion is 1.25:1
3.Stir evenly until it is transparent and uniform without drawing
4.The mixed glue is still for a few minutes.when the bubble disappears pour it into the grinding tool
5.Use toothpick to stick a little color to the glue dropping mold,and stir ie slightly to the desired ink effect
6.Or pour the toner poeder into the prepared gutta percha,stir evenly and then pour into the mold
7.It can be demoulded after the adhesive is completely solidified,usually it takes 24h in room temperature
8.After demoulding,polish slightly,the finished product will be more beautiful
-
Factory Free sample China Coatings Auxiliary Agent Liquid & Solid Coating Epoxy Resin E Series
Method of use
1.open the scale,put on the measruing cup and clear it
2.Put glue A first,then glue B ,the proportion is 1.25:1
3.Stir evenly until it is transparent and uniform without drawing
4.The mixed glue is still for a few minutes.when the bubble disappears pour it into the grinding tool
5.Use toothpick to stick a little color to the glue dropping mold,and stir ie slightly to the desired ink effect
6.Or pour the toner poeder into the prepared gutta percha,stir evenly and then pour into the mold
7.It can be demoulded after the adhesive is completely solidified,usually it takes 24h in room temperature
8.After demoulding,polish slightly,the finished product will be more beautiful
-
Discount wholesale China Waterproof and Mouldproof Marble Ceramic Tile Epoxy Resin Gap Grouting
Method of use
1.open the scale,put on the measruing cup and clear it
2.Put glue A first,then glue B ,the proportion is 1.25:1
3.Stir evenly until it is transparent and uniform without drawing
4.The mixed glue is still for a few minutes.when the bubble disappears pour it into the grinding tool
5.Use toothpick to stick a little color to the glue dropping mold,and stir ie slightly to the desired ink effect
6.Or pour the toner poeder into the prepared gutta percha,stir evenly and then pour into the mold
7.It can be demoulded after the adhesive is completely solidified,usually it takes 24h in room temperature
8.After demoulding,polish slightly,the finished product will be more beautiful
-
Cheap PriceList for China 400ml Ceramic Tile Epoxy Sealer Resin
Method of use
1.open the scale,put on the measruing cup and clear it
2.Put glue A first,then glue B ,the proportion is 1.25:1
3.Stir evenly until it is transparent and uniform without drawing
4.The mixed glue is still for a few minutes.when the bubble disappears pour it into the grinding tool
5.Use toothpick to stick a little color to the glue dropping mold,and stir ie slightly to the desired ink effect
6.Or pour the toner poeder into the prepared gutta percha,stir evenly and then pour into the mold
7.It can be demoulded after the adhesive is completely solidified,usually it takes 24h in room temperature
8.After demoulding,polish slightly,the finished product will be more beautiful
-
Cheap PriceList for China 400ml Ceramic Tile Epoxy Sealer Resin
Method of use
1.open the scale,put on the measruing cup and clear it
2.Put glue A first,then glue B ,the proportion is 1.25:1
3.Stir evenly until it is transparent and uniform without drawing
4.The mixed glue is still for a few minutes.when the bubble disappears pour it into the grinding tool
5.Use toothpick to stick a little color to the glue dropping mold,and stir ie slightly to the desired ink effect
6.Or pour the toner poeder into the prepared gutta percha,stir evenly and then pour into the mold
7.It can be demoulded after the adhesive is completely solidified,usually it takes 24h in room temperature
8.After demoulding,polish slightly,the finished product will be more beautiful
-
Cheap PriceList for China 400ml Ceramic Tile Epoxy Sealer Resin
Method of use
1.open the scale,put on the measruing cup and clear it
2.Put glue A first,then glue B ,the proportion is 1.25:1
3.Stir evenly until it is transparent and uniform without drawing
4.The mixed glue is still for a few minutes.when the bubble disappears pour it into the grinding tool
5.Use toothpick to stick a little color to the glue dropping mold,and stir ie slightly to the desired ink effect
6.Or pour the toner poeder into the prepared gutta percha,stir evenly and then pour into the mold
7.It can be demoulded after the adhesive is completely solidified,usually it takes 24h in room temperature
8.After demoulding,polish slightly,the finished product will be more beautiful
-
Manufacturer for China Dry Type Transformer Epoxy Resin
Method of use
1.open the scale,put on the measruing cup and clear it
2.Put glue A first,then glue B ,the proportion is 1.25:1
3.Stir evenly until it is transparent and uniform without drawing
4.The mixed glue is still for a few minutes.when the bubble disappears pour it into the grinding tool
5.Use toothpick to stick a little color to the glue dropping mold,and stir ie slightly to the desired ink effect
6.Or pour the toner poeder into the prepared gutta percha,stir evenly and then pour into the mold
7.It can be demoulded after the adhesive is completely solidified,usually it takes 24h in room temperature
8.After demoulding,polish slightly,the finished product will be more beautiful
